FAQ

Q1.Firmware Update- P5　mini　Fighting Board

Q : I don’t know how to do firmware update, how can I do?

A : There’s firmware update guide for you to download and read.

You can download it from Brook’s official website.
Go to “Support Download”Brook’s official website download page: http://www.brookaccessory.com/download/

Q : I have some problem with firmware update.

A : Should you have any problem, please try the troubleshooting methods as below :

a. Make sure it recognizes " WPM USB " device (update mode) in Device and Printers on PC then to do firmware.
b. Make sure you download the correct file.
c. Switch another USB port and retry.
d. Disable antivirus and retry.
e. Run the program as administrator.
f. Restart PC and retry.
g. Restart firmware and retry.
h. Use another PC and retry.
i. Disconnect, reconnect and retry.
j. Use other network.
K. Use VPM and retry.
l. Shorten cable length/Use another cable and retry.

m. If you have installed ZeroPlus Driver before, remove it and retry.

If you have tried all the methods above and your problem still exists, log on to Brook’s official website, go to “Contact us” for assistance.

Q : I try to update the firmware for my converter , It keeps giving me the message

" Downlaod file failed " and "The remote server returned an error: 227 " , What can i do ?

A :

Download the offline firmware verssion , then update again.

  Unzip password : Brook

https://drive.google.com/drive/folders/1g6vfdoAKSTq2IyrfoptrSX3Wn8oLhR5T?usp=drive_link
Q2.Defective - P5 mini Fighting Board

Q : My fighting board used to work perfectly, but now it doesn’t seem to work anymore, it seems to be defective.

Please try the troubleshooting methods as below:

1. Make sure you have followed a firmware update guide to do firmware update first.

2. Switch another USB port and retry.

3. Connect the fighting board to PC with fighting sticks, then press buttons in Device and Printers, and make sure if it works.

If it doesn't help, please contact your original place of purchase for assistance.

For further assistance, please log on to Brook's official website, go to“Contact us", and leave your message, we will contact you soon.

Q: Neither the console nor the PC recognizes the board.

A: If none of the methods below helps, the board can be defective.

1. Try other usb cables

2. Go to Devices and Printers on PC(Windows10/11) to see if the board is recognized
Q3.Other Technical Questions - P5 mini Fighting Board

Q : What are M1 and M2 for?

A : They are for LS/RS/DP Switch.

Q : How to change SOCD mode?

Q: Can I use simulate LS, RS, and DP functions?

A: Yes . the operation is the same as Brook Fighting PS3/PS4.

Can't Find What You Need?